AHE Series · Industrial · 10000 m³/h

MIA-AHE1000GL Industrial Energy Recovery Ventilator

米亚大型工业热回收新风机组 — High-volume industrial energy recovery ventilator for large manufacturing plants, hospital complexes, airports, and major commercial buildings. 10000 m³/h rated airflow from dual industrial centrifugal fan assembly on a 380V 3-phase 3000W drive. Modular enthalpy core banks, industrial-grade ESP + optional HEPA filtration, and full BMS integration via Modbus and BACnet. Variable frequency drive (VFD) is standard for energy-optimal operation at all load conditions.

Key Features

Technical Highlights

The AHE1000GL doubles the fan assembly and core bank of the AHE500GL — delivering 10000 m³/h with a redundant dual fan configuration and VFD-based variable speed drive standard. Built for large-scale facilities requiring intelligent BMS-integrated ventilation control.

Dual Industrial Centrifugal Fan Assembly with VFD

Two independently driven industrial centrifugal fans deliver 10000 m³/h total airflow at rated conditions. Each fan is driven by a dedicated 380V 3-phase motor — the dual-fan arrangement provides operational redundancy and allows one fan to be serviced while the unit continues to operate at reduced capacity. Variable frequency drive (VFD) is standard on both fans, enabling proportional airflow control from BMS or CO₂ demand signals. Fan bearings are rated for 100,000 hours continuous operation at industrial duty.

Modular PSY Enthalpy Core Banks

Multiple PSY polymer enthalpy exchanger core banks are arranged in a modular array scaled to 10000 m³/h airflow, achieving up to 85% total energy recovery. The modular bank design allows individual core sections to be withdrawn and replaced without draining the full system — scheduled maintenance can target one bank at a time while the remainder continue operating. Each bank transfers both sensible heat and latent moisture in full enthalpy mode, eliminating the humidity swings common with sensible-only plate exchangers.

BMS Integration via Modbus / BACnet + HEPA Option

Native Modbus RTU and BACnet IP integration is standard — allowing full AHU control from the building management system including airflow setpoint, fan speed, filter status alarms, energy recovery efficiency monitoring, and fault diagnostics. Industrial-grade ESP + optional H13 HEPA filtration module provides cleanroom-adjacent air quality for hospital ORs, pharmaceutical facilities, and sensitive industrial processes. All filter sections accessible via hinged door panels for in-place service.

Applications

The AHE1000GL serves the most demanding large-scale ventilation projects — where single-unit reliability, BMS integration, and energy recovery at scale are all non-negotiable requirements.

Large Manufacturing Plants

High-volume manufacturing environments require 6–20 air changes per hour to control heat, humidity, and process contaminants. The AHE1000GL's 10000 m³/h output covers a 2000–4000 m² production floor at code-compliant ventilation rates while recovering up to 85% of exhaust energy — delivering significant HVAC operating cost reduction in continuous manufacturing operations.

Hospital Complexes & Healthcare Campuses

Hospital campuses require zone-by-zone ventilation control with BMS integration for infection control compliance. The AHE1000GL's native Modbus/BACnet connectivity allows full integration with hospital BMS — enabling zone isolation, pressure differential control, and remote monitoring of filter condition and energy recovery performance. Optional H13 HEPA module provides appropriate pre-treatment for clinical zones.

Airport Terminals & Transport Hubs

Airport terminals present extreme ventilation challenges — high ceilings, massive volumes, variable occupancy, and 24/7 operation. The AHE1000GL with VFD and BMS integration enables demand-controlled ventilation strategies that ramp airflow to match actual occupancy — validated against passenger flow data from ticketing and gate systems — delivering measured energy savings versus fixed-flow systems.

Photo Gallery

Product Showcase

Specifications

Technical Parameters

380V 3-phase · Dual fan assembly · VFD standard · BMS Modbus/BACnet · Industrial GL filtration (G4 + F7 + ESP) · HEPA option

Model	Flow Rate	Power	Efficiency	Noise	Duct Ø	Dimensions (mm)	Weight	Voltage
MIA-AHE1000GL	10000 m³/h	3000W	80–85%	60–75 dB(A)	Ø630 mm	4800×2200×2200	850 kg	380V 3-phase

* VFD (variable frequency drive) standard on all fan motors. BMS integration via Modbus RTU and BACnet IP standard. H13/H14 HEPA filtration module optional. Custom duct connection sizes and panel arrangements available for project-specific requirements. Contact our industrial engineering team for detailed project specification.

MIA-AHE1000GL Industrial Energy Recovery Ventilator

Technical Highlights

Applications

Product Showcase

Technical Parameters

Related Models

Interested in this model?

Make Your Home More Comfortable